Targeted isolation of 1,1-diphenyl-2-picrylhydrazyl inhibitors from Saxifraga atrata and their antioxidant activities

Saxifraga atrata is an important traditional Tibetan medicine used to treat cough and pneumonia, and has tremendous medicinal potential. In this study, we devised a technique to separate 1,1-diphenyl-2-picrylhydrazyl inhibitors from a methanol extract of S. atrata. The material was first processed using MCI GEL CHP20P medium-pressure liquid chromatography, yielding 1.1 g of the target fraction Fr2. Subsequently, online hydrophilic interaction liquid chromatography-1,1-diphenyl-2-picrylhydrazyl assay was used to identify prospective 1,1-diphenyl-2-picrylhydrazyl inhibitors, and two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25) were identified from Fr2. Then, medium-pressure preparation was continued using an XIon column to separate two 1,1-diphenyl-2-picrylhydrazyl inhibitor fractions (Fr24 and Fr25). The target compound was concentrated in fractions Fr24 and Fr25 using reverse-phase liquid chromatography during further separation procedures. Finally, the purity, structure, and 1,1-diphenyl-2-picrylhydrazyl inhibitory activity of the isolated 1,1-diphenyl-2-picrylhydrazyl inhibitors were determined. Two 1,1-diphenyl-2-picrylhydrazyl inhibitors (adenosine with the half maximal inhibitory concentration of 66.87 ± 14.33 μM and (-)-4-O-(E)-caffeoyl-l -threonic acid with the half maximal inhibitory concentration of 59.06 ± 5.02 μM) were isolated with purities exceeding 95%. The results showed that this technology is effective in the targeted separation of antioxidants from natural products.     

Enhanced stability designs of cell membrane chromatography for screening drug leads

Cell membrane chromatography is an effective method for screening bioactive components acting on specific receptors in complex systems, which maintains the biological activity of the membrane receptors and improves screening efficiency. However, traditional cell membrane chromatography suffers from poor stability, resulting in a limited life span and low reproducibility, greatly limiting the application of this method. To address this problem, cyanuric chloride-decorated silica gel was used for the covalent immobilization of the cell membranes. Cyanuric chloride reacts with amino groups on the cell membranes and membrane receptors to form covalent bonds. In this way, the cell membranes are not easy to fall off. The column life of the cyanuric chloride-decorated epidermal growth factor receptor/cell membrane chromatography column was extended to more than 8 days, whereas the column life of the normal cell membrane chromatography column dropped sharply in the first 3 days. A cyanuric chloride-decorated epidermal growth factor receptor/cell membrane chromatography online HPLC-IT-TOF-MSn system was applied for screening drug leads from Trifolium pratense L. One potential drug lead, formononetin, which acts on the epidermal growth factor receptor, was screened. Our strategy of covalently immobilizing cell membrane receptors also improved the stability of cell membrane chromatography.     

Optimizing the Photovoltaic Performance of Organic Solar Cells for Indoor Light Harvesting

Organic solar cells (OSCs) harvesting indoor light are highly promising for emerging technologies, such as internet of things. Herein, the photovoltaic performance of PTB7-Th:PC₇₁BM solar cells constructed using “optimized (with 1,8-diiodooctane (DIO))” and “non-optimized (without DIO)” processing conditions are compared for indoor and outdoor applications. We find that in comparison to the “optimized” solar cell, the “non-optimized” solar cell is less efficient under simulated solar light illumination (100 mW cm⁻², spectral range 350–1100 nm), owing to significant bimolecular charge carrier recombination losses. However, under simulated indoor illumination (3.28 mW cm⁻², spectral range 400–700 nm), bimolecular recombination losses are effective suppressed, thus the power conversion efficiency of the solar cell without DIO was increased to 14.7 %, higher than that of the solar cell with DIO (14.2 %). These results suggest that the common strategy used to optimize the OSCs could be undesired for indoor OSCs. We demonstrate that the efforts for realizing the desired “morphology” of the active layer for the outdoor OSCs may be unnecessary for indoor OSCs, allowing us to realize high-efficiency indoor OSCs using a non-halogenated solvent.     

A cosolvent pretreatment: effect of solvent–water on enzymatic hydrolysis of glucan,lignin structure,and dynamics

Cellulose - In this study, a biomass pretreatment strategy with a recyclable cosolvent (toluene sulfonic acid/ethanol) was developed. The low boiling point solvent (78.15 °C),...     

Simultaneous photoelectrochemical detection of dual microRNAs by capturing CdS quantum dots and methylene blue based on target-initiated strand displaced amplification

Herein,we propose a novel photoelectrochemical(PEC) biosensor for dual microRNAs(miRNAs) highly sensitive and simultaneous biosensing based on strand displaced amplification(SDA) reaction.The recognition of H_(miR-21) and H_(let-7 a) by microRNA-21 and let-7 a leads to their change in hairpin structures,subsequently initiating the immobilization of abundant CdS quantum dots(CdS QD s) and methylene blue(MB) based on SDA reaction.The immobilized CdS QDs and MB produce both high PEC currents under430 nm light and 627 nm light illumination,respectively,and the generated PEC currents are closely relied on target miRNAs amounts.Thus,highly sensitive and simultaneous detection of microRNA-21 and let-7 a was readily achieved with detection limit at 6.6 fmol/L and 15.4 fmol/L based on 3σ,respectively.Further,this PEC biosensor was applied in simultaneous analysis of miRNA-21 and let-7 a in breast cancer patient's serum with acceptable results.We expect this biosensor will find more useful application in diagnosis of miRNA-related diseases.     

Rapid and label-free classification of pathogens based on light scattering,reduced power spectral features and support vector machine

The rapid identification of pathogens is crucial in controlling the food quality and safety. The proposed system for the rapid and label-free identification of pathogens is based on the principle of laser scattering from the bacterial microbes. The clinical prototype consists of three parts: the laser beam, photodetectors, and the data acquisition system. The bacterial testing sample was mixed with 10 mL distilled water and placed inside the machine chamber. When the bacterial microbes pass by the laser beam, the scattering of light occurs due to variation in size, shape, and morphology. Due to this reason, different types of pathogens show their unique light scattering patterns. The photo-detectors were arranged at the surroundings of the sample at different angles to collect the scattered light. The photodetectors convert the scattered light intensity into a voltage waveform. The waveform features were acquired by using the power spectral characteristics, and the dimensionality of extracted features was reduced by applying minimal-redundancy-maximal-relevance criterion (mRMR). A support vector machine (SVM) classifier was developed by training the selected power spectral features for the classification of three different bacterial microbes. The resulting average identification accuracies of E. faecalis,E. coli and S. aureus were 99%, 87%, and 94%, respectively. The overall experimental results yield a higher accuracy of 93.6%, indicating that the proposed device has the potential for label-free identification of pathogens with simplicity, rapidity, and cost-effectiveness.     

Inorganic–Organic Hybrid Molecular Clusters with Cu2I2 Rhomboid Dimer Core as Light-Emitting Coating Materials

Journal of Cluster Science - In this paper, a series of light-emitting copper(I) iodide inorganic–organic hybrid clusters has been synthesized, and they are 0D-Cu2I2(fmp)4 (1,...     

Form-stable and tough paraffin-Al2O3/high density polyethylene composites as environment-friendly thermal energy storage materials: preparation,characterization and analysis

Journal of Thermal Analysis and Calorimetry - In this study, we focus on important global issue containing both environmental pollution control and energy saving. High density polyethylene (HDPE)...     

A Rhodamine-based fluorescent sensor for chromium ions and its application in bioimaging

A rhodamine-based sensor (1) has been developed for the detection of chromium ions. Cr³⁺-induced opening of the rhodamine spirocycle in sensor (1) led to the distinct colorimetric and fluorescence responses. Among all the tested ions, only Cr³⁺ generated a significant fluorescence enhancement of up to 13-fold, which indicated the high selectivity of 1. Sensor (1) was successfully applied in the in vivo fluorescence imaging of Cr³⁺ in C. elegans. The results provided solid evidences for the future estimation of Cr³⁺ in environmental applications and tobacco samples.     

Selective biocompatibility and responsive imaging property of cationic conjugated polyelectrolyte to cancer cells

Herein, we bring novel insights into a water-soluble conjugated polyelectlyte by deeply studying its properties in cells and observe fl uorescence enhancement of blue emission and turn-on of long-wavelength emission of PFP in HepG2 cells.